稠油油藏试井理论研究

分析研究国内外稠油热采模型文献资料,总结归纳了9种稠油热采模型,主要包括非牛顿流体均质地层模型、二区复合模型、三区复合模型、多区复合模型、考虑重力超覆的数学模型以及干扰分析等,并对部分压力变化曲线及压力导数变化曲线做了简要的分析.比较各模型的优缺点,并指出目前的模型存在的问题以及稠油试井的发展趋势.     

多级复合半导体纳米材料的制备

金属氧化物、Ⅲ-Ⅴ、Ⅱ-Ⅵ等半导体纳米材料由于其独特的功能性质已广泛应用于光学、电子、太阳能转化、催化等领域,是当今先进材料领域的研究前沿与热点。随着科技的发展,人们对材料的高效、多功能要求已成为必然,对半导体材料发展要求亦如此。多组分复合、多层次结构协同是实现半导体纳米材料多功能化与高效化的有效途径。构筑多级结构组合纳米半导体,不但可以调控其能带结构而提高半导体材料的光电与催化性能,而且由于多级低维纳米结构聚集时形成的空间位阻效应可以有效克服纳米晶“易团聚”难题。本文提出多级结构组合纳米晶的概念、分类,结合近年来该领域的研究实践,较系统地综述了多级复合半导体纳米结构制备的最新研究进展。首先简要介绍了多级复合半导体纳米材料的概念与典型结构; 其次对典型多级复合半导体纳米材料的制备方法进行了重点评述,分别综述了液相法、气相法以及最新发展起来的静电纺丝等方法在多级结构半导体复合纳米材料制备中的应用实践。再其次,对以具有半导体特性的石墨烯及其功能化衍生物为基体的新型多级复合半导体纳米材料的制备做了综述。最后对半导体/半导体多级结构复合纳米材料的发展方向做了展望。     

有机-无机复合骨修复材料

本文对近5年来有机/无机复合骨修复材料研究领域的进展进行了综述,根据材料组分的特点分析其在生物相容性、生物降解性、生物活性以及力学性能等方面的优缺点,同时探讨了目前骨修复材料领域存在的问题,并对今后人工骨替代材料的发展趋势作出了展望。     

2D-C/SiC复合材料的单轴拉伸力学行为及其强度

通过单调拉伸和循环加卸载试验, 研究了平纹编织C/SiC复合材料的损伤演化过程及其应力-应变行为. 结果表明, 残余应变、卸载模量和外加应力的关系曲线与拉伸应力-应变曲线具有类似的形状. 基于剪滞理论和混合率建立了材料的损伤本构关系和强度模型, 分析计算表明, 残余应变主要由裂纹张开位移和裂纹间距决定, 而卸载模量主要由界面脱粘率决定; 材料的单轴拉伸行为主要由纵向纤维束决定, 横向纤维对材料的整体模量和强度贡献较小. 理论模拟结果与试验值吻合较好.      

Reverse Atom Transfer Radical Polymerization of MMA in the Presence of CaCO3/SiO2 Two-Component Composite Particles

Summary: We previously discovered that structurally well-defined polymer/inorganic composite particles, i.e., poly(methyl methacrylate) (PMMA)/CaCO₃/SiO₂ three-component composite particles, can be achieved via reverse atom transfer radical polymerization (ATRP), using 2,2′-azo-bis-isobutyronitrile as initiator and Cu^II bromide as catalyst. In the present study, the influence of the mass ratio of CaCO₃/SiO₂ two-component composite particles to methyl methacrylate (MMA) on the rate and behavior of the polymerization was studied in detail. The results illustrate that increasing the mass ratio of CaCO₃/SiO₂ two-component composite particles will decrease the overall rate of polymerization of MMA under standard reverse ATRP conditions. Thermal properties of the obtained well-defined particles were characterized and determined by thermogravimetric analysis (TGA). The results indicate that well-defined PMMA chains grafted on the surface of CaCO₃/SiO₂ particles were only degraded by random chain scission of C C linkages within the PMMA chain, which is different from the degradation of PMMA chains prepared via traditional radical polymerization. This difference is reasonably ascribed to the difference between the end groups of PMMA prepared via reverse ATRP and that via traditional radical polymerization, which has been confirmed by end group analysis measured by ¹H–NMR spectroscopy.     

花状Zn-MOF衍生碳@MoS2复合材料制备及吸波性能

采用Zn-MOF(MOF为金属有机骨架)制备纳米多孔碳材料,通过自组装法将多孔碳与花状MoS₂结合,制备出具有规整有序结构的花状Zn-MOF衍生碳@MoS₂复合吸波材料。基于Zn-MOF衍生纳米多孔碳的高孔隙率、大比表面积,MoS₂的花状结构引起的电磁波多次反射和散射,以及MoS₂和Zn-MOF衍生碳之间存在的强极化效应、良好的阻抗匹配和协同作用,Zn-MOF衍生碳@MoS₂在频率为9.28 GHz时的最佳反射损耗达到-49.68 dB,表现出优异的电磁波吸收性能。     

Power transmission through double-walled laminated composite panels considering porous layer-air gap insulation

The acoustic behavior of double-walled laminated composite panels consisting of two porous and air gap middle layers is studied within the classical laminated plate theory （CLPT）. Thus, viscous and inertia coupling in a dynamic equation, as well as stress transfer, thermal and elastic coupling of porous material ave based on the Biot theory. In addition, the wave equations are extracted according to the vibration equation of composite layers. The transmission loss （TL） of the structure is then calculated by solving these equations simultaneously. Statistical energy analysis （SEA） is developed to divide the structure into specific subsystems, and power transmission is extracted with balancing power flow equations of the subsystems. Comparison between the present work and the results reported elsewhere shows excellent agreement. The results also indicate that, although favorable enhancement is seen in noise control particularly at high frequencies, the corresponding parameters associated with fluid phase and solid phase of the porous layer are important on TL according to the boundary condition interfaces. Finally, the influence of composite material and stacking sequence on power transmission is discussed.     

2-2型PMNT/NFO复合磁电效应模拟

利用弹性力学模型,基于铁电相与铁磁相的本构方程,建立磁电复合材料的本构方程,推导2-2型非理想耦合的磁电双层、三层复合薄膜的纵向、横向磁电(ME)电压系数.研究铁磁相材料铁酸镍(NFO)和铁电相材料铌镁酸铅-钛酸铅(PMNT)复合的磁电效应,分析复合材料的磁电电压系数与PMNT体积分数、界面耦合参数、两相体积比及复合总层数的关系.结果表明两相材料的性能、体积分数以及耦合系数、复合层数都影响磁电电压系数.     

Compression-induced stiffness in the buckling of a one fiber composite

We study the buckling of a one fiber composite whose matrix stiffness is slightly dependent on the compressive force. We show that the equilibrium curves of the system exhibit a limit load when the induced stiffness parameter gets bigger than a threshold. This limit load increases when the stiffness parameter is increasing and it is related to a possible localized path in the post-buckling domain. Such a change in the maximum load may be very desirable from a structural stand point.